Images are for reference only. The supplied part’s appearance may differ.
Sauer Danfoss 157B4116 PVEM Electronic Actuator for PVG32 12V Hirschmann Connector Valve
HydraulicsPart number: 157B4116
Sauer Danfoss 157B4116 is a Series 4 PVEM electrohydraulic proportional actuator for PVG 32 valves. It uses a 12 V DC supply, a ratiometric control signal and a Hirschmann-style DIN connector. Verify the valve configuration and equipment serial number before ordering.
Looking for Sauer Danfoss 157B4116? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Sauer Danfoss |
|---|---|
| Part number | 157B4116 |
| Category | Hydraulics |
| Published designation | Sauer Danfoss 157B4116 PVEM Electronic Actuator for PVG32 12V Hirschmann Connector Valve |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Actuator type | PVEM proportional actuator |
| Series | Series 4 |
| Supply voltage | 12 V DC |
| Control signal | Ratiometric |
| Connector | 1 x 4 DIN 43650-A / ISO 4400, Hirschmann style |
| Connector direction | 90° upward |
| Ingress protection | IP65 |
| Coil power | 8 W |
| Hysteresis | 15% |
| On-stroke response A and B | 350 ms |
| De-stroke reaction A and B | 90 ms |
| Valve-side interface | PVE32 O-ring |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What is the 157B4116 and is it a complete hydraulic valve?
It is a Series 4 PVEM electrohydraulic proportional actuator for a PVG 32 valve, not a complete valve assembly. Confirm the existing valve configuration and required components before ordering.
What voltage and connector does the 157B4116 use?
This actuator is rated at 12 V DC and uses a Hirschmann-style 1 x 4 DIN 43650-A / ISO 4400 connector. Check the existing connector and supply before ordering.
What control signal does the 157B4116 require?
Danfoss specifies a ratiometric control signal. A forum discussion about this exact part raises concerns about PWM outputs, but forum advice is not a wiring specification. Confirm controller output and wiring against the applicable Danfoss documentation before use.
Will the 157B4116 fit my machine or PVG 32 valve?
The 157B4116 is a PVG 32 actuator, but the valve designation alone does not establish fitment on a particular machine. Provide the equipment model and serial number, valve identification and existing actuator part number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.