Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
ATV11HU05M3U — Variable speed drive
Electrical & controlsPart number: ATV11HU05M3U
ATV11HU05M3U — Variable speed drive — Schneider Electric reference ATV11HU05M3U. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Looking for Schneider Electric ATV11HU05M3U? This catalogue reference is listed under Electrical & controls. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Schneider Electric |
|---|---|
| Part number | ATV11HU05M3U |
| Category | Electrical & controls |
| Range of Product | Altivar |
| Product or Component Type | Variable speed drive |
| [Us] rated supply voltage | 200...230 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Motor power kW | 0.18 kW |
| Maximum Horse Power Rating | 0.25 hp |
| Line current | 1.8 A 208 V, Isc = 1 kA |
| Nominal output current | 1.6 A 230 V motor 4 kHz |
| Maximum transient current | 2.4 A 60 s |
| Power dissipation in W | 13.5 W at nominal load |
| Switching frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| Braking torque | 150 % of nominal motor torque with braking resistor at high inertia 20 % of nominal motor torque without braking resistor at no load 80 % of nominal motor torque with braking resistor at no load |
| Electrical connection | Terminal 1.5 mm², AWG 14 AI1, RA-RC, LI1...LI4, DO) Terminal 1.5 mm², AWG 14 L1, L2, L3, U, V, W, PA, PC) |
| Supply | Internal supply for logic inputs 15 V +/- 15 %) 100 mA overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 5...5.25 VDC 10 mA overload and short-circuit protection |
| Analogue input type | Configurable current AI1 4...20 mA 250 Ohm without adding resistor Configurable voltage AI1 0...5 V 40000 Ohm only with internal supply Configurable current AI1 0...20 mA 250 Ohm Configurable voltage AI1 0...10 V 40000 Ohm |
| Discrete input type | Assignable Ll1 forward 5000 Ohm 15 V 24 V Assignable Ll2 reverse 5000 Ohm 15 V 24 V Assignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V |
| Discrete input logic | Positive logic (source) LI1...LI4), < 5 V, > 11 V |
| Discrete output type | Assignable as external voltage DO 30 V max, 30 mA Assignable as open collector logic output DO 100 Ohm, 50 mA max Factory set as PWM open collector output DO at 2 kHz 10 mA max Protected relay logic RA-RC 1 NO Assignable as internal voltage DO |
| Minimum switching current | RA-RC 10 mA 24 V DC |
| Maximum switching current | 2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC 2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC 5 A 250 V AC resistive cos phi = 1 0 ms RA-RC 5 A 30 V DC resistive cos phi = 1 0 ms RA-RC |
| Protection type | Line supply overvoltage drive Line supply undervoltage drive Overcurrent between output phases and earth drive Overheating protection drive Short-circuit between motor phases drive Thermal protection motor |
| Frequency resolution | Display unit 0.1 Hz Analog input converter A/D, 10 bits |
| Maximum motor cable length | 65.6 ft (20 m) with additional EMC filter from 2 to 16 kHz EN 55011 class A group 1 16.4 ft (5 m) with additional EMC filter from 2 to 16 kHz EN 55011 class B |
| Vibration resistance | 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
| Ambient air temperature for operation | 14…104 °F (-10…40 °C) without derating 104…122 °F (40…50 °C) by removing the protective cover from the top of the drive 122…140 °F (50…60 °C) by removing the protective cover from the top of the drive with current derating of 2.2 % per °C |
| Operating altitude | <= 3280.84 ft (1000 m) without derating > 3280.84 ft (1000 m) with current derating 1 % per 100 m |
| Supply voltage limits | 170…253 V |
| Published component type | Variable speed drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Research is not yet available for this part in English. Ask our team for help.
Get a quote for this part