Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
ATV61HU75N4 — Variable speed drive
filterPart number: ATV61HU75N4
The Schneider Electric ATV61HU75N4 is an Altivar 61 variable speed drive rated for a 7.5 kW (10 hp) motor and a 380–480 V three-phase supply. It is listed with a graphic terminal, level 3 EMC filter and Modbus and CANopen communications. Verify motor ratings and installation requirements for the intended equipment.
Looking for Schneider Electric ATV61HU75N4? This catalogue reference is listed under filter. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Schneider Electric |
|---|---|
| Part number | ATV61HU75N4 |
| Category | Electrical & controls |
| Published description | Variable speed drive |
| Reference status | Published catalogue reference; confirm specification and fitment before ordering |
| Availability | On request |
| Product range | Altivar 61 |
| Motor power rating | 7.5 kW (10 hp) |
| Supply voltage | 380–480 V AC, three-phase |
| Supply frequency | 50/60 Hz |
| Output current | 17.6 A at 380 V; 14 A at 460 V |
| Communication protocols | Modbus and CANopen |
| Operator terminal | Graphic terminal |
| EMC filter | Level 3 |
| Dimensions (width × height × depth) | 175 × 295 × 187 mm |
| Weight | 5.5 kg |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What motor power and supply does the ATV61HU75N4 require?
The drive is rated for a 7.5 kW (10 hp) motor and a 380–480 V three-phase supply at 50/60 Hz. Check motor nameplate current and the installation requirements before selection; provide the equipment model and serial number for application verification.
Does the ATV61HU75N4 have a display and built-in communications?
Schneider lists this exact reference with a graphic terminal and identifies Modbus and CANopen as its communication protocols. Confirm the interfaces and configuration required by your existing control system before ordering.
What are the dimensions and output current of the ATV61HU75N4?
The published dimensions are 175 × 295 × 187 mm and the weight is 5.5 kg. Published output current is 17.6 A at 380 V or 14 A at 460 V. Check the motor current and installation clearances rather than selecting on power alone.
Is the ATV61HU75N4 still supported by Schneider Electric?
Schneider Electric's US product page lists the reference as discontinued on December 2, 2020, with standard service ending January 1, 2025. This does not establish the condition or availability of any individual unit; confirm those details when requesting a quote.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.