Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
LXM15HC11N4X — Motion servo drive
Electrical & controlsPart number: LXM15HC11N4X
LXM15HC11N4X — Motion servo drive — Schneider Electric reference LXM15HC11N4X. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Looking for Schneider Electric LXM15HC11N4X? This catalogue reference is listed under Electrical & controls. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Schneider Electric |
|---|---|
| Part number | LXM15HC11N4X |
| Category | Electrical & controls |
| Range of product | Lexium 15 |
| Product or component type | Motion servo drive |
| power supply voltage | 208...480 V - 10...10 % |
| Continuous output current | 40 A three phase |
| transient RMS output current | 80 A for 5 s three phase |
| Peak output current | 112 A three phase |
| Nominal power | 22.3 kW three phase |
| Line current | 35 A at 208 V three phase 36.6 A at 480 V three phase |
| Apparent power | 30 kVA |
| power supply voltage limits | 187.2…528 V |
| power supply frequency | 50/60 Hz - 5...5 % |
| power supply frequency limits | 47.5…63 Hz |
| Switching frequency | 8 kHz |
| Output voltage | <= power supply voltage |
| Electrical connection | Terminal, clamping capacity: 2.5 mm², AWG 14 (+ 24 VDC, 0 VDC) Terminal, clamping capacity: 25 mm², AWG 2 (PA/+, PC/-, PBi, PBe) Terminal, clamping capacity: 25 mm², AWG 2 (R/L1, S/L2, T/L3) Terminal, clamping capacity: 0.5 mm², AWG 20 (R1A,R1C,LI1,LI2,LI3,LI4,ENABLE,LO1,LO2,PWRI+/PWRI-,AI1+/AI1-,AI2+/AI2-,AO1,AO2) |
| Tightening torque | + 24 VDC, 0 VDC: 0.3 N.m PA/+, PC/-, PBi, PBe: 6…8 N.m R/L1, S/L2, T/L3: 6…8 N.m R1A, R1C, LI1, LI2, LI3, LI4, ENABLE, LO1, LO2, PWR, AI1+/AI1-, AI2+/AI2-: 0.3 N.m |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal |
| Discrete input number | 2 safety discrete input(s) 5 logic including ENABLE discrete input(s) |
| Discrete input type | Logic (LI1, LI2, LI3, LI4, ENABLE terminals) Safety (PWRI+, PWRI- terminals) |
| input sampling time | AI1+/AI1-, AI2+/AI2: 0.0625 ms analog LI1, LI2, LI3, LI4: 0.25 ms discrete |
| Discrete input voltage | 20...30 V DC for logic 24 V DC for safety |
| Discrete input logic | Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for logic Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for safety PWR function active at state 0 |
| Safety input response time | <= 1.5 ms |
| Discrete output number | 1 for relay 2 for logic |
| Discrete output type | Logic LO1, LO2 Relay R1A, R1C NO |
| Discrete output voltage | 24 V DC <= 30 V |
| Discrete output logic | Negative logic (sink) |
| Analogue input number | 2 |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Research is not yet available for this part in English. Ask our team for help.
Get a quote for this part