Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
LXM15LD21M3 — Motion servo drive
Electrical & controlsPart number: LXM15LD21M3
LXM15LD21M3 — Motion servo drive — Schneider Electric reference LXM15LD21M3. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Looking for Schneider Electric LXM15LD21M3? This catalogue reference is listed under Electrical & controls. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Schneider Electric |
|---|---|
| Part number | LXM15LD21M3 |
| Category | Electrical & controls |
| Range of product | Lexium 15 |
| Product or component type | Motion servo drive |
| power supply voltage | 200...240 V - 15...10 % |
| Continuous output current | 4 A single phase 6 A three phase |
| transient RMS output current | 15 A for 2 s three phase 9 A for 2 s single phase |
| Peak output current | 13 A single phase 21 A three phase |
| Nominal power | 1.2 kW single phase 2.1 kW three phase |
| Line current | 10.1 A at 200 V single phase 8.6 A at 240 V three phase 8.8 A at 200 V three phase 9.9 A at 240 V single phase |
| Apparent power | 2.4 kVA |
| power supply voltage limits | 170…264 V |
| power supply frequency | 50/60 Hz - 5...5 % |
| power supply frequency limits | 47.5…63 Hz |
| Switching frequency | 8 kHz |
| Output voltage | <= power supply voltage |
| Electrical connection | Spring terminal, clamping capacity: 2.5 mm², AWG 14 (+ 24 VDC, 0 VDC) Terminal, clamping capacity: 1.5 mm², AWG 14 (PA/+, PC/-, PBi, PBe) Terminal, clamping capacity: 1.5 mm², AWG 14 (R/L1, S/L2, T/L3) Spring terminal, clamping capacity: 0.5 mm², AWG 20 (R1A, R1C, LI1, LI2, LI3, LI4, ENABLE, LO1, LO2, PWR, AI1+/AI1-, AI2+/AI2-) |
| Tightening torque | PA/+, PC/-, PBi, PBe: 0.6 N.m R/L1, S/L2, T/L3: 0.6 N.m |
| Protection type | Against short-circuit outputs signal Against reverse polarity inputs signal |
| Discrete input number | 1 safety discrete input(s) 5 logic including ENABLE discrete input(s) |
| Discrete input type | Logic (LI1, LI2, LI3, LI4, ENABLE terminals) Safety (PWR terminals) |
| input sampling time | AI1+/AI1-, AI2+/AI2: 0.0625 ms analog LI1, LI2, LI3, LI4: 0.25 ms discrete |
| Discrete input voltage | 20...30 V DC for logic 24 V DC for safety |
| Discrete input logic | Positive logic (sink) state 0 if < 5 V or input not wired state 1 if > 11 V for logic Positive logic (sink) state 0 if < 5 V or input not wired state 1 if > 15 V for safety PWR function active at state 0 |
| Safety input response time | <= 1.5 ms |
| Discrete output number | 1 for relay 2 for logic |
| Discrete output type | Logic LO1, LO2 Relay R1A, R1C NO |
| Discrete output voltage | 24 V DC <= 30 V |
| Discrete output logic | Positive logic (source) |
| Analogue input number | 2 |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Research is not yet available for this part in English. Ask our team for help.
Get a quote for this part