Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
LXM23AU07M3X — Motion servo drive
Electrical & controlsPart number: LXM23AU07M3X
LXM23AU07M3X — Motion servo drive — Schneider Electric reference LXM23AU07M3X. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Looking for Schneider Electric LXM23AU07M3X? This catalogue reference is listed under Electrical & controls. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Schneider Electric |
|---|---|
| Part number | LXM23AU07M3X |
| Category | Electrical & controls |
| Range of product | Lexium 23 Plus |
| Product or component type | Motion servo drive |
| [Us] rated supply voltage | 220 V single phase (tolerance: - 10...15 %) 220 V 3 phases (tolerance: - 20...15 %) |
| Supply voltage limits | 200…255 V single phase 170…255 V 3 phases |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5…63 Hz |
| Continuous output current | 5.1 A |
| Continuous power | 750 W at 220 V |
| Nominal power | 0.75 kW at 220 V |
| Maximum leakage current | 3.5 mA |
| Output voltage | <= power supply voltage |
| Electrical connection | Terminal, clamping capacity: 1.3 mm², AWG 16 (L1-L2) Terminal, clamping capacity: 2.1 mm², AWG 14 (R, S, T) Terminal, clamping capacity: 0.82 mm², AWG 18 (U, V, W) Terminal, clamping capacity: 2.1 mm², AWG 14 (PA/+, PBe) |
| Tightening torque | PE (ground): 1.4 N.m |
| Discrete input number | 8 programmable discrete input(s) |
| Discrete input type | Programmable (CN1 terminals) |
| Discrete input voltage | 12...24 V DC for logic |
| Discrete input logic | Positive or negative (CN1) |
| Discrete output number | 5 |
| Discrete output type | Logic output(s) (CN1)12...24 V DC |
| Discrete output voltage | 12...24 V DC |
| Analogue input number | 2 |
| Analogue input type | V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm T_REF voltage analog input: - 10...10 V, impedance: 10 kOhm |
| Control signal type | Servo motor encoder feedback |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor Abnormal pulse control command: drive |
| Communication interface | CANopen, integrated CANmotion, integrated |
| Physical interface | 2-wire RS485 multidrop for Modbus |
| Signalling function | Servo status and fault codes five 7-segment display units |
| Operating position | Vertical |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Research is not yet available for this part in English. Ask our team for help.
Get a quote for this part