Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
6EP3437-7SB00-3AX0 — Stabilized Power Supply
Electrical & controlsPart number: 6EP3437-7SB00-3AX0
6EP3437-7SB00-3AX0 — Stabilized Power Supply — Siemens part reference 6EP3437-7SB00-3AX0. Request a destination-specific quotation with shipping included. Confirm equipment model, serial number, quantity and any required certificates; availability, exact supply specification and warranty terms are checked before ordering.
Looking for Siemens 6EP3437-7SB00-3AX0? This catalogue reference is listed under Electrical & controls. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Siemens |
|---|---|
| Part number | 6EP3437-7SB00-3AX0 |
| Category | Electrical & controls |
| Item Type Name | Stabilized Power Supply |
| Product Family / Series | SITOP PSU6200 |
| Model Designation | SITOP PSU6200/3AC/24VDC/40A |
| input_voltage_ac_rated_range | 400-500 V AC |
| input_voltage_ac_operating_range | 323-576 V AC |
| input_voltage_dc_range | 450-600 V DC |
| input_type | 3-phase AC or DC |
| line_frequency_nominal | 50/60 Hz |
| line_frequency_range | 47-63 Hz |
| mains_buffering_time | 18 ms minimum at rated output current |
| output_voltage_nominal | 24 V DC |
| output_current_rated | 40 A |
| output_current_range | 0-40 A; 48 A up to +45°C |
| output_power_typical | 960 W |
| efficiency_maximum | 96% |
| output_voltage_ripple_typical | 50 mV |
| output_voltage_ripple_maximum | 80 mV |
| voltage_peak_typical | 30 mV |
| voltage_peak_maximum | 80 mV |
| voltage_rise_time_typical | 100 ms |
| overshoot_at_switch_on | <2% |
| response_delay_maximum | 0.5 s |
| short_circuit_current_at_startup | 48 A typical |
| derating | 3% per K from +60°C to +70°C |
| mounting_type | DIN rail (EN 60715, 35x7.5/15 mm) |
| mounting_orientation | Vertical (input terminals bottom, output terminals top) |
| clearance_requirement | 45 mm minimum above and below device |
| terminal_type | Push-in terminals |
| status_indication | Green LED for 24 V OK |
| diagnostic_output | Electronic NO contact, 30 V DC / 0.1 A rating |
| power_factor_correction | Active PFC |
| Weight | 1.7 kg |
| Reference status | Published catalogue reference; confirm specification and fitment before ordering |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Research is not yet available for this part in English. Ask our team for help.
Get a quote for this part