Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
SKF 10X26X7 HMS5 RG - 10mm ID x 26mm OD x 7mm Wide Radial Shaft Seal
shaft sealPart number: 10X26X7 HMS5 RG
SKF 10X26X7 HMS5 RG is a metric radial shaft seal for a 10 mm shaft and 26 mm housing bore, with a 7 mm width. It has a single nitrile rubber sealing lip, a garter spring and a metal-reinforced rubber outside diameter. It is designed to retain oil or grease around a rotating shaft.
Looking for SKF 10X26X7 HMS5 RG? This catalogue reference is listed under shaft seal. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | SKF |
|---|---|
| Part number | 10X26X7 HMS5 RG |
| Category | Seals & gaskets |
| Published designation | SKF 10X26X7 HMS5 RG - 10mm ID x 26mm OD x 7mm Wide Radial Shaft Seal |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Shaft diameter | 10 mm |
| Housing bore diameter | 26 mm |
| Seal width | 7 mm |
| Seal design | HMS5 |
| Sealing lip material | Nitrile rubber (NBR) |
| Sealing lip | Single lip |
| Auxiliary lip | None |
| Outside diameter construction | Rubber, metal reinforced |
| Spring | Garter spring |
| Operating temperature range | −40 to 100 °C |
| Permissible circumferential speed | 1.31 m/s |
| Listed rotational speed | 2,520 r/min |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What are the dimensions of SKF 10X26X7 HMS5 RG?
It is a metric seal for a 10 mm shaft and a 26 mm housing bore, with a 7 mm seal width. Match all three dimensions and the seal design before ordering.
Does this seal have a dust lip or garter spring?
The HMS5 RG has a single nitrile rubber sealing lip and a garter spring. It has no auxiliary lip; check whether your application requires separate dust exclusion.
What temperature range and speed are listed for this seal?
The listed operating temperature range is −40 to 100 °C. The listed circumferential speed is 1.31 m/s, equivalent to approximately 2,520 rpm for a 10 mm shaft. Suitability also depends on the operating conditions.
Will this 10 x 26 x 7 seal fit my equipment?
Dimensions alone do not establish machine fitment. Check the original seal designation, housing and shaft dimensions, lubricant and operating conditions. Provide the equipment model and serial number for fitment verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.