Images are for reference only. The supplied part’s appearance may differ.
Stucchi F FAP9DZN 3/8 NPT - 811401004 Replacement Hydraulic Quick Release Coupler Nipple
HydraulicsPart number: F FAP9DZN 3/8 NPT
Stucchi F FAP9DZN 3/8 NPT, item 811401004, is a D-type female flat-face hydraulic quick coupling with a 3/8-inch body and female 3/8-inch NPT port. It is part of the FAP-ZN series for Stucchi multiconnections and has zinc-nickel treated carbon steel construction. Confirm the plate model and whether it requires the A or D version before ordering.
Looking for Stucchi F FAP9DZN 3/8 NPT? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Stucchi |
|---|---|
| Part number | F FAP9DZN 3/8 NPT |
| Category | Hydraulics |
| Published designation | Stucchi F FAP9DZN 3/8 NPT - 811401004 Replacement Hydraulic Quick Release Coupler Nipple |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Coupling half | Female |
| Series | FAP-ZN |
| Body size | 3/8 in |
| Port thread | 3/8 in female NPT (ANSI B1.20.1) |
| Version | D |
| Valve style | Flat face |
| Material and treatment | Carbon steel, zinc-nickel treatment |
| Seal material | Nitrile rubber (NBR) |
| Maximum operating pressure | 35 MPa (350 bar), coupled or uncoupled |
| Maximum suggested flow | 46 L/min |
| Hex size | 30 mm |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Is Stucchi 811401004 a female coupler or a male nipple?
Stucchi identifies F FAP9DZN 3/8 NPT, item 811401004, as the female half. The male half is a different item, so confirm which half you need before ordering.
What thread and body size does F FAP9DZN 3/8 NPT have?
It has a 3/8-inch body and a 3/8-inch female NPT port, specified to ANSI B1.20.1. The body size and port thread both need to be checked against the existing assembly.
Will this D-type coupler fit my multicoupling plate?
Fitment depends on the specific Stucchi multiconnection: the 3/8-inch FAP9ZN comes in A and D versions. Check the plate datasheet and provide the equipment and plate model and serial numbers for verification. Stucchi says not to use FAP-ZN on custom-made or other non-Stucchi multiconnections.
Can this coupler be connected with residual hydraulic pressure?
The FAP-ZN series is designed for connection with residual pressure on both sides within the manufacturer’s limits. Do not connect or disconnect with dynamic pressure, such as with the pump running, or with flow in the circuit. Follow the current Stucchi instructions for the complete assembly.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.