Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Walker Filtration 1 Um Filter ELEM E30306RX1
filterPart number: E30306RX1
A published reference E30306RX1 is an RX1-grade, 1 micron particulate filter element for compressed air filtration. The reverse-flow element is intended for dust filtration, including downstream of a desiccant dryer. Confirm the housing model and filter grade before ordering.
Looking for Walker Filtration E30306RX1? This catalogue reference is listed under filter. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Walker Filtration |
|---|---|
| Part number | E30306RX1 |
| Category | Filters & filtration |
| Published designation | Walker Filtration 1 Um Filter ELEM E30306RX1 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Filter grade | RX1 |
| Particle removal rating | 1 micron |
| Element type | Reverse-flow particulate filter element |
| Filter media | Deep-pleated borosilicate glass microfiber |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What does the E30306RX1 filter element remove?
E30306RX1 is an RX1-grade particulate element rated for 1 micron particle removal. It is intended for dust filtration in compressed air, rather than selection as an oil-vapour removal element.
Which filter housings are listed for E30306RX1?
The element is listed for Walker Alpha A30006 and A30015 filters. Check the complete housing model, existing element number and equipment serial number before ordering, as filter grade and configuration matter.
Can E30306RX1 be used after a desiccant dryer?
It is described as a reverse-flow dust element for capturing particulate and desiccant fines downstream of a dryer. Confirm the housing, required filtration grade and operating conditions for your installation.
When should the E30306RX1 element be replaced?
The published Alpha filter guidance calls for element replacement every 12 months or 8,000 operating hours, whichever comes first. Check the instructions for your particular filter and operating conditions.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.