Images are for reference only. The supplied part’s appearance may differ.
Yuken DSG-01-2B3B-D12-N-70-L 1/8 Solenoid Operated Directional Control Valve
HydraulicsPart number: DSG-01-2B3B-D12-N-70-L
Yuken DSG-01-2B3B-D12-N-70-L is a 1/8-size solenoid-operated hydraulic directional control valve. It has a two-position, spring-offset 2B3B spool, a 12 V DC coil, a plug-in electrical connector and reverse solenoid mounting. Verify the circuit function and mounting against the equipment before ordering.
Looking for Yuken DSG-01-2B3B-D12-N-70-L? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Yuken |
|---|---|
| Part number | DSG-01-2B3B-D12-N-70-L |
| Category | Hydraulics |
| Published designation | Yuken DSG-01-2B3B-D12-N-70-L 1/8 Solenoid Operated Directional Control Valve |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Valve size | 01; 1/8 nominal size |
| Number of positions | 2 |
| Spool and spring arrangement | 2B3B; spring offset |
| Coil voltage | 12 V DC |
| Electrical connection | Plug-in connector, N type |
| Solenoid mounting | Reverse mounting, L suffix |
| Normal spool position | P, A, B and T connected |
| Switched spool position | P to A; B to T |
| Design number | 70 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What coil voltage and electrical connection does this valve use?
The D12 coil is rated for 12 V DC, and N denotes a plug-in electrical connector. Yuken lists a 10.8–13.2 V serviceable range for the D12 coil. Confirm the supply and connector before ordering.
How does the 2B3B spool route hydraulic flow?
In its normal position, P, A, B and T are connected. In the switched b position, P connects to A and B connects to T. Check that this circuit function suits the machine before selecting the valve.
What does the L suffix mean, and can I omit it when replacing the valve?
L identifies the reverse-mounted solenoid configuration. Do not assume a valve without the suffix is interchangeable: compare the solenoid location, spool function, connector and available clearance against the installed valve.
Will this valve fit my machine or manifold?
Machine-specific fitment is not established. Provide the equipment model and serial number, the complete marking on the existing valve, and the mounting and circuit details for verification. The 1/8 designation alone does not establish a threaded port connection.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.