תמונת רכיב להמחשה — לא צילום של המותג או המק״ט המדויק. יש לאשר את המפרט; החלק המסופק עשוי להיראות שונה.
Schneider Electric
ATV950D90N4E — Variable speed drive
חשמל ובקרהמספר חלק: ATV950D90N4E
ATV950D90N4E — Variable speed drive — Schneider Electric reference ATV950D90N4E. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
מחפשים Schneider Electric ATV950D90N4E? פריט קטלוגי זה מופיע בסיווג חשמל ובקרה. שלחו את מספר החלק ופרטי הציוד כדי שנוכל לאמת את המפרט והזמינות ולהכין הצעת מחיר הכוללת משלוח.
זמינות לפי בקשה
מפרט טכני
| יצרן | Schneider Electric |
|---|---|
| מספר חלק | ATV950D90N4E |
| קטגוריה | חשמל ובקרה |
| Range of product | Altivar Process ATV900 |
| Product or component type | Variable speed drive |
| Mounting mode | Wall mount |
| Continuous output current | 173 A at 2.5 kHz for normal duty 145 A at 2.5 kHz for heavy duty |
| [Us] rated supply voltage | 380...480 V |
| Relative symmetric mains voltage tolerance | 10 % |
| Relative symmetric network frequency tolerance | 5 % |
| nominal output current | 173.0 A |
| Motor power kW | 90.0 kW for normal duty 75.0 kW for heavy duty |
| IP degree of protection | IP55 |
| Degree of protection | UL type 1 |
| Electrical connection | Control: screw terminal 0.5...1.5 mm² Line side: screw terminal 95 mm² Motor: screw terminal 120 mm² DC bus: screw terminal 95...120 mm² |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
| Local signalling | Local diagnostic: 3 LED (mono/dual colour) Embedded communication status: 5 LED (dual colour) Communication module status: 2 LED (dual colour) Presence of voltage: 1 LED (red) |
| Input compatibility | DI1...DI8: discrete input level 1 PLC conforming to IEC 61131-2 DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2 |
| Discrete input logic | 16 preset speeds |
| Discrete input number | 10 |
| Discrete input type | DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
| Discrete output number | 2 |
| Discrete output type | Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits |
| Analogue output number | 2 |
| Analogue output type | Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits |
| Relay output number | 3 |
| Relay output type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles |
| Maximum switching current | Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Minimum switching current | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Published component type | Variable speed drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
המידע בקטלוג עלול להיות לא מדויק או לא מעודכן. מפרט מלא ופרטים מאומתים זמינים לפי בקשה. יש לאשר עמנו את מספר החלק והתאמתו לציוד לפני ההזמנה.
שאלות על המוצר
מידע מחקרי על חלק זה עדיין אינו זמין בעברית. פנו לצוות שלנו לקבלת עזרה.
קבלת הצעת מחיר לחלק זה