部品タイプを示す参考画像であり、このブランドや部品番号そのものの写真ではありません。仕様をご確認ください。納入品の外観は異なる場合があります。
Schneider Electric
140DDM39000 — Mixed discrete I/O module
入出力モジュール部品番号: 140DDM39000
140DDM39000 — Mixed discrete I/O module — Schneider Electric reference 140DDM39000. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Schneider Electric 140DDM39000をお探しですか。このカタログ参照品は「入出力モジュール」に分類されています。部品番号と機械の情報をお送りください。仕様と供給状況を確認し、送料込みのお見積もりをご案内します。
在庫状況はお問い合わせください
技術仕様
| メーカー | Schneider Electric |
|---|---|
| 部品番号 | 140DDM39000 |
| カテゴリー | センサー・自動化 |
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Mixed discrete I/O module |
| Discrete input number | 16 2 groups of 8 |
| Discrete input logic | Sink |
| Network frequency limits | 47…63 Hz |
| Discrete input voltage | 24 V DC |
| Input voltage limits | 30 V <= 1 V during one cycle 56 V during 1.3 ms <= 1 V during 10 s |
| Voltage state 0 guaranteed | -3...5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Current state 1 guaranteed | >= 2 mA |
| Input impedance | 2500 Ohm |
| Discrete output number | 8 2 groups of 4 |
| Discrete output type | Solid state |
| Discrete output logic | Sink |
| Discrete output voltage | 24 V |
| Output voltage limits | 19.2...30 V DC typical 56 V DC during 1.3 ms |
| Maximum load current | <= 0.5 A per point <= 2 A per group <= 4 A per module |
| Maximum voltage drop | <0.4 V 0.5 A |
| Absolute maximum output | 5 A during 500 µs per point |
| Maximum load inductance | 500 mH 4 Hz |
| Maximum leakage current | 0.4 mA 30 V DC |
| Response time on output | <= 1 ms at state 0 to state 1 <= 1 ms at state 1 to state 0 |
| Protection Type | On output by transient voltage suppression On input by resistor limited Internal output protection by 5 A fuse per group |
| Associated fuse rating | 5 A per group |
| Power dissipation | 1.75 W + (0.36 x input point on) + (1.1 total output load current) |
| Local signalling | 1 LED (green) for bus communication is present (Active) for no voltage in output and input (F) 1 LED (red) for output is turned on 2 LEDs (green) for fault detected on the input point 2 LEDs (red) for fault detected on the output point 2 LEDs (red) |
| Bus current requirement | 330 mA |
| Published component type | Mixed discrete I/O module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
カタログ情報には誤りや古い情報が含まれる場合があります。完全な仕様と確認済みの詳細情報はお問い合わせください。ご注文前に部品番号とお使いの機械への適合を当社にご確認ください。
製品に関するご質問
この部品に関する調査情報は、まだ日本語ではご用意できていません。担当チームにお問い合わせください。
この部品の見積もりを依頼