ATV71E5U22N4 — Variable speed drive

Name: ATV71E5U22N4 — Variable speed drive
Brand: Schneider Electric
SKU: ATV71E5U22N4

電装・制御部品

部品番号: ATV71E5U22N4

ATV71E5U22N4 — Variable speed drive — Schneider Electric reference ATV71E5U22N4. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.

Schneider Electric ATV71E5U22N4をお探しですか。このカタログ参照品は「電装・制御部品」に分類されています。部品番号と機械の情報をお送りください。仕様と供給状況を確認し、送料込みのお見積もりをご案内します。

在庫状況はお問い合わせください

価格はお見積もりにて

送料込み保証・サービスこの部品の見積もりを依頼

技術仕様

メーカー	Schneider Electric
部品番号	ATV71E5U22N4
カテゴリー	電装・制御部品
Range of product	Altivar 71
Product or component type	Variable speed drive
Motor power kW	2.2 kW
Motor power hp	3 hp
power supply voltage	380...480 V - 15...10 %
Line current	7.1 A at 480 V 8.2 A at 380 V
Apparent power	5.4 kVA at 380 V
Maximum transient current	8.7 A for 60 s 9.6 A for 2 s
Speed drive output frequency	0…1600 Hz
Nominal switching frequency	4 kHz
Switching frequency	1...16 kHz adjustable 4...16 kHz with derating factor
power supply voltage limits	323…528 V
power supply frequency	50...60 Hz +/- 5 %
power supply frequency limits	47.5…63 Hz
Continuous output current	4.8 A at 4 kHz, 460 V 5.8 A at 4 kHz, 380 V
Speed range	1…100 for asynchronous motor in open-loop mode, without speed feedback 1…1000 for asynchronous motor in closed-loop mode with encoder feedback 1…50 for synchronous motor in open-loop mode, without speed feedback
Speed accuracy	+/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
Torque accuracy	+/- 15 % in open-loop mode, without speed feedback +/- 5 % in closed-loop mode with encoder feedback
Transient overtorque	170 % of nominal motor torque +/- 10 % for 60 s 220 % of nominal motor torque +/- 10 % for 2 s
Braking torque	<= 150 % with braking or hoist resistor 30 % without braking resistor
Output voltage	<= power supply voltage
type of cable for mounting in an enclosure	With an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC With NEMA Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Electrical connection	Terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) Terminal, clamping capacity: 10 mm², AWG 6 (L1/R, L2/S, L3/T) Terminal, clamping capacity: 4 mm², AWG 8 (U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Tightening torque	0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) 2.1 N.m, 18.3 lb.in (L1/R, L2/S, L3/T) 1.4 N.m, 12.3 lb.in (U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Supply	Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Analogue input number	2
Analogue input type	AI1-/Al1+ bipolar differential voltage: +/- 10 V DC, resolution 11 bits + sign AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits AI2 software-configurable voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 11 bits
input sampling time	AI1-/Al1+2 ms, +/- 0.5 ms for analog input(s) Al22 ms, +/- 0.5 ms for analog input(s) LI1...LI52 ms, +/- 0.5 ms for discrete input(s) LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s)
Published component type	Variable speed drive
Reference status	Published part reference; specification and fitment require confirmation
Availability	On request

カタログ情報には誤りや古い情報が含まれる場合があります。完全な仕様と確認済みの詳細情報はお問い合わせください。ご注文前に部品番号とお使いの機械への適合を当社にご確認ください。

製品に関するご質問

この部品に関する調査情報は、まだ日本語ではご用意できていません。担当チームにお問い合わせください。

この部品の見積もりを依頼