LXM15HC11N4X製品写真は提供されていません
カタログ参照品です。在庫状況、正確な仕様、純正品または代替品の供給は見積書で確認します。
Schneider Electric
LXM15HC11N4X — Motion servo drive
電装・制御部品部品番号: LXM15HC11N4X
LXM15HC11N4X — Motion servo drive — Schneider Electric reference LXM15HC11N4X. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Schneider Electric LXM15HC11N4Xをお探しですか。このカタログ参照品は「電装・制御部品」に分類されています。部品番号と機械の情報をお送りください。仕様と供給状況を確認し、送料込みのお見積もりをご案内します。
在庫状況はお問い合わせください
技術仕様
| メーカー | Schneider Electric |
|---|---|
| 部品番号 | LXM15HC11N4X |
| カテゴリー | 電装・制御部品 |
| Range of product | Lexium 15 |
| Product or component type | Motion servo drive |
| power supply voltage | 208...480 V - 10...10 % |
| Continuous output current | 40 A three phase |
| transient RMS output current | 80 A for 5 s three phase |
| Peak output current | 112 A three phase |
| Nominal power | 22.3 kW three phase |
| Line current | 35 A at 208 V three phase 36.6 A at 480 V three phase |
| Apparent power | 30 kVA |
| power supply voltage limits | 187.2…528 V |
| power supply frequency | 50/60 Hz - 5...5 % |
| power supply frequency limits | 47.5…63 Hz |
| Switching frequency | 8 kHz |
| Output voltage | <= power supply voltage |
| Electrical connection | Terminal, clamping capacity: 2.5 mm², AWG 14 (+ 24 VDC, 0 VDC) Terminal, clamping capacity: 25 mm², AWG 2 (PA/+, PC/-, PBi, PBe) Terminal, clamping capacity: 25 mm², AWG 2 (R/L1, S/L2, T/L3) Terminal, clamping capacity: 0.5 mm², AWG 20 (R1A,R1C,LI1,LI2,LI3,LI4,ENABLE,LO1,LO2,PWRI+/PWRI-,AI1+/AI1-,AI2+/AI2-,AO1,AO2) |
| Tightening torque | + 24 VDC, 0 VDC: 0.3 N.m PA/+, PC/-, PBi, PBe: 6…8 N.m R/L1, S/L2, T/L3: 6…8 N.m R1A, R1C, LI1, LI2, LI3, LI4, ENABLE, LO1, LO2, PWR, AI1+/AI1-, AI2+/AI2-: 0.3 N.m |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal |
| Discrete input number | 2 safety discrete input(s) 5 logic including ENABLE discrete input(s) |
| Discrete input type | Logic (LI1, LI2, LI3, LI4, ENABLE terminals) Safety (PWRI+, PWRI- terminals) |
| input sampling time | AI1+/AI1-, AI2+/AI2: 0.0625 ms analog LI1, LI2, LI3, LI4: 0.25 ms discrete |
| Discrete input voltage | 20...30 V DC for logic 24 V DC for safety |
| Discrete input logic | Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for logic Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for safety PWR function active at state 0 |
| Safety input response time | <= 1.5 ms |
| Discrete output number | 1 for relay 2 for logic |
| Discrete output type | Logic LO1, LO2 Relay R1A, R1C NO |
| Discrete output voltage | 24 V DC <= 30 V |
| Discrete output logic | Negative logic (sink) |
| Analogue input number | 2 |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
カタログ情報には誤りや古い情報が含まれる場合があります。完全な仕様と確認済みの詳細情報はお問い合わせください。ご注文前に部品番号とお使いの機械への適合を当社にご確認ください。
製品に関するご質問
この部品に関する調査情報は、まだ日本語ではご用意できていません。担当チームにお問い合わせください。
この部品の見積もりを依頼