部品タイプを示す参考画像であり、このブランドや部品番号そのものの写真ではありません。仕様をご確認ください。納入品の外観は異なる場合があります。
Schneider Electric
LXM23AU10M3X — Motion servo drive
電装・制御部品部品番号: LXM23AU10M3X
LXM23AU10M3X — Motion servo drive — Schneider Electric reference LXM23AU10M3X. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Schneider Electric LXM23AU10M3Xをお探しですか。このカタログ参照品は「電装・制御部品」に分類されています。部品番号と機械の情報をお送りください。仕様と供給状況を確認し、送料込みのお見積もりをご案内します。
在庫状況はお問い合わせください
技術仕様
| メーカー | Schneider Electric |
|---|---|
| 部品番号 | LXM23AU10M3X |
| カテゴリー | 電装・制御部品 |
| Range of product | Lexium 23 Plus |
| Product or component type | Motion servo drive |
| [Us] rated supply voltage | 220 V single phase (tolerance: - 10...15 %) 220 V 3 phases (tolerance: - 20...15 %) |
| Supply voltage limits | 200…255 V single phase 170…255 V 3 phases |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5…63 Hz |
| Continuous output current | 7.3 A |
| Continuous power | 1000 W at 220 V |
| Nominal power | 1 kW at 220 V |
| Maximum leakage current | 3.5 mA |
| Output voltage | <= power supply voltage |
| Electrical connection | Terminal, clamping capacity: 1.3 mm², AWG 16 (L1-L2) Terminal, clamping capacity: 2.1 mm², AWG 14 (R, S, T) Terminal, clamping capacity: 2.1 mm², AWG 14 (PA/+, PBe) Terminal, clamping capacity: 0.82 mm², AWG 16 (U, V, W) |
| Tightening torque | PE (ground): 1.4 N.m |
| Discrete input number | 8 programmable discrete input(s) |
| Discrete input type | Programmable (CN1 terminals) |
| Discrete input voltage | 12...24 V DC for logic |
| Discrete input logic | Positive or negative (CN1) |
| Discrete output number | 5 |
| Discrete output type | Logic output(s) (CN1)12...24 V DC |
| Discrete output voltage | 12...24 V DC |
| Analogue input number | 2 |
| Analogue input type | V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm T_REF voltage analog input: - 10...10 V, impedance: 10 kOhm |
| Control signal type | Servo motor encoder feedback |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor Abnormal pulse control command: drive |
| Communication interface | CANopen, integrated CANmotion, integrated |
| Physical interface | 2-wire RS485 multidrop for Modbus |
| Signalling function | Servo status and fault codes five 7-segment display units |
| Operating position | Vertical |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
カタログ情報には誤りや古い情報が含まれる場合があります。完全な仕様と確認済みの詳細情報はお問い合わせください。ご注文前に部品番号とお使いの機械への適合を当社にご確認ください。
製品に関するご質問
この部品に関する調査情報は、まだ日本語ではご用意できていません。担当チームにお問い合わせください。
この部品の見積もりを依頼