Technische illustratie. Representative component image; exact configuration and appearance may vary. Afbeeldingen zijn uitsluitend ter referentie. Het geleverde onderdeel kan er anders uitzien.
1SBH137001R1422 — Block Contactor Relay
contactorOnderdeelnummer: 1SBH137001R1422
ABB 1SBH137001R1422 is an NF22E-14 four-pole contactor relay for auxiliary and control circuits. It has two normally open and two normally closed mechanically linked contacts, a 250–500 V AC 50/60 Hz or DC electronic control coil, built-in surge protection and screw terminals.
Op zoek naar ABB 1SBH137001R1422? Deze catalogusreferentie is ingedeeld als ‘contactor’. Stuur het onderdeelnummer en de gegevens van uw machine, zodat we de specificaties en beschikbaarheid kunnen controleren en een offerte inclusief verzending kunnen opstellen.
Beschikbaarheid op aanvraag
Technische specificaties
| Fabrikant | ABB |
|---|---|
| Onderdeelnummer | 1SBH137001R1422 |
| Categorie | Elektrotechniek en besturing |
| Product Net Width | 45 mm |
| Product Net Depth / Length | 77 mm |
| Product Net Height | 86 mm |
| Product Net Weight | 0.31 kg |
| Number of Auxiliary Contacts NO | 2 |
| Number of Auxiliary Contacts NC | 2 |
| Number of Poles | 4P |
| Rated Operational Voltage | Auxiliary Circuit 690 V |
| Rated Frequency (f) | Auxiliary Circuit 50 / 60 Hz |
| Conventional Free-air Thermal Current (I th ) | acc. to IEC 60947-5-1, Θ = 40 °C 16 A |
| Rated Operational Current AC-15 (I e ) | 6 A at 24–127 V; 4 A at 220–240 V; 3 A at 400–440 V; 2 A at 500 V; 2 A at 690 V |
| Rated Operational Current DC-13 (I e ) | 6 A / 144 W at 24 V DC; 2.8 A / 134 W at 48 V DC; 1 A / 72 W at 72 V DC; 0.55 A / 60 W at 110 V DC; 0.55 A / 69 W at 125 V DC; 0.27 A / 60 W at 220 V DC; 0.27 A / 68 W at 250 V DC; 0.15 A / 60 W at 400 V DC; 0.13 A / 65 W at 500 V DC; 0.1 A / 60 W at 600 V DC |
| Rated Short-time Withstand Current Low Voltage (I cw ) | for 0.1 s 140 A |
| Rated Insulation Voltage (U i ) | acc. to IEC 60947-5-1 690 V |
| Rated Impulse Withstand Voltage (U imp ) | 6 kV |
| Maximum Electrical Switching Frequency | AC-15: 1,200 cycles per hour; DC-13: 900 cycles per hour |
| Maximum Mechanical Switching Frequency | 6000 cycles per hour |
| Rated Control Circuit Voltage (U c ) | 250–500 V AC, 50/60 Hz; 250–500 V DC |
| Operate Time | Between Coil De-energization and NC Contact Closing 13 ... 98 ms |
| Mounting on DIN Rail | TH35-7.5 (35 × 7.5 mm) or TH35-15 (35 × 15 mm), according to IEC 60715 |
| Mounting by Screws (not supplied) | 2 x M4 Screws Placed Diagonally |
| Connecting Capacity Auxiliary Circuit | Flexible with Ferrule 1/2x 0.75 ... 2.5 mm² |
| Connecting Capacity Control Circuit | Flexible with Ferrule 1/2x 0.75 ... 2.5 mm² |
| Wire Stripping Length | Auxiliary Circuit 10 mm |
| Degree of Protection | acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20 |
| Tightening Torque | Auxiliary Circuit 1.2 N·m |
| Terminal Type | Screw Terminals |
| Product Name | Block Contactor Relay |
| Published component type | Block Contactor Relay |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Surge Protection | Built-in coil surge protection |
| Contact Configuration | 2 normally open and 2 normally closed mechanically linked auxiliary contacts |
| Ambient Operating Temperature | −40 to +70 °C in free air near the contactor |
Catalogusinformatie kan fouten bevatten of verouderd zijn. Volledige specificaties en gecontroleerde gegevens zijn op aanvraag beschikbaar. Bevestig vóór bestelling het onderdeelnummer en de geschiktheid voor uw machine met ons.
Productvragen
Onderzoeksinformatie over dit onderdeel is nog niet beschikbaar in het Nederlands. Vraag ons team om hulp.
Offerte voor dit onderdeel aanvragen