Catalogusreferentie. Beschikbaarheid, exacte specificaties en originele of alternatieve levering worden in de offerte bevestigd.
ATS01N244Q — Soft starter
Elektrotechniek en besturingOnderdeelnummer: ATS01N244Q
ATS01N244Q — Soft starter — Schneider Electric reference ATS01N244Q. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Op zoek naar Schneider Electric ATS01N244Q? Deze catalogusreferentie is ingedeeld als ‘Elektrotechniek en besturing’. Stuur het onderdeelnummer en de gegevens van uw machine, zodat we de specificaties en beschikbaarheid kunnen controleren en een offerte inclusief verzending kunnen opstellen.
Beschikbaarheid op aanvraag
Technische specificaties
| Fabrikant | Schneider Electric |
|---|---|
| Onderdeelnummer | ATS01N244Q |
| Categorie | Elektrotechniek en besturing |
| Range of Product | Altistart 01 |
| Product or Component Type | Soft starter |
| [Us] rated supply voltage | 400 V - 15...10 % |
| Motor power kW | 22 kW, 3 phase 400 V |
| Maximum Horse Power Rating | 25 hp, 3 phase 400 V |
| IcL starter rating | 44 A |
| Current consumption | 132 A at nominal load |
| Power dissipation in W | 22 W at full load and at end of starting 268 W in transient state |
| Supply voltage limits | 340…440 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network Frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Internal LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA |
| Discrete input voltage | 24 V |
| Discrete input logic | Positive logic LI1, LI2, BOOST <= 3 V >= 10 V |
| Discrete output current | 2 A DC-13 3 A AC-15 |
| Discrete output type | Relay outputs R1A, R1C |
| Discrete output voltage | 24 V DCrelay outputs 250 V ACrelay outputs |
| Minimum switching current | 10 mA 17 V DC relay outputs |
| Display type | 1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached |
| Tightening torque | 44.3 lbf.in (5 N.m) 6.2 lbf.in (0.7 N.m) |
| Electrical connection | Earth connection: tinned connector fixed using Ø 6 mm screws 4 mm screw clamp terminal - rigid with cable end 1 6...35 mm² power circuit Screw connector - rigid with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - rigid without cable end 2 6...25 mm² power circuit Screw connector - rigid without cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible with cable end 1 4...25 mm² power circuit Screw connector - flexible with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible without cable end 1 6...25 mm² power circuit Screw connector - flexible without cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp termin |
| Operating position | Vertical +/- 10 degree |
| Height | 5.7 in (146 mm) |
| Width | 7.09 in (180 mm) |
| Depth | 5.0 in (126 mm) |
| Published component type | Soft starter |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogusinformatie kan fouten bevatten of verouderd zijn. Volledige specificaties en gecontroleerde gegevens zijn op aanvraag beschikbaar. Bevestig vóór bestelling het onderdeelnummer en de geschiktheid voor uw machine met ons.
Productvragen
Onderzoeksinformatie over dit onderdeel is nog niet beschikbaar in het Nederlands. Vraag ons team om hulp.
Offerte voor dit onderdeel aanvragen