Catalogusreferentie. Beschikbaarheid, exacte specificaties en originele of alternatieve levering worden in de offerte bevestigd.
BMXMSP0200 — PTO module
Elektrotechniek en besturingOnderdeelnummer: BMXMSP0200
BMXMSP0200 — PTO module — Schneider Electric reference BMXMSP0200. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Op zoek naar Schneider Electric BMXMSP0200? Deze catalogusreferentie is ingedeeld als ‘Elektrotechniek en besturing’. Stuur het onderdeelnummer en de gegevens van uw machine, zodat we de specificaties en beschikbaarheid kunnen controleren en een offerte inclusief verzending kunnen opstellen.
Beschikbaarheid op aanvraag
Technische specificaties
| Fabrikant | Schneider Electric |
|---|---|
| Onderdeelnummer | BMXMSP0200 |
| Categorie | Elektrotechniek en besturing |
| Range of Product | Modicon X80 |
| Product or Component Type | PTO module |
| Number of channels | 2 |
| Number of inputs | 4 |
| Discrete input type | Current sink yes origin input IEC 61131-2 type 3 Current sink yes proximity input and limit switch input IEC 61131-2 type 3 Current sink or source counter in position input IEC 61131-2 type 3 Current sink or source drive ready, emergency input IEC 61131-2 type 3 |
| Input compatibility | 2-wire/3-wire proximity sensor 19.2…30 V IEC 947-5-2 |
| Output compatibility | Signal converter (USIC) RS422, 7 mA input Source input, 5 V to 24 V |
| Output frequency | 200 kHz <1.6 ft (0.5 m) with USIC and VW3M8210R05 100 kHz <16.4 ft (5 m) with the normal source input circuit 200 kHz <32.8 ft (10 m) with the RS422 compatible circuits |
| Operating threshold | > 12 V no error supply voltage > 8 V error supply voltage |
| Input voltage | 24 V DC |
| Input current | 4.3 mA |
| Voltage state 1 guaranteed | >= 11 V |
| Current consumption | 35 mA 24 V DC preactuator 150 mA 3.3 V DC typical 200 mA 3.3 V DC maximum |
| Current state 1 guaranteed | >= 2 mA |
| Voltage state 0 guaranteed | 5 V |
| Current state 0 guaranteed | <= 1.5 mA |
| Number of outputs | 1 pulse output 2 auxiliary output |
| Preactuator voltage detection threshold | < 8 V error preactuator voltage auxiliary output < 8 V no error preactuator voltage auxiliary output > 14 V error preactuator voltage pulse output > 14 V no error preactuator voltage pulse output |
| Output voltage | 24 V DC |
| Output voltage limits | 19...30 V |
| Discrete output current | 50 mA |
| Current per channel | 0.4 A |
| Maximum leakage current | 0.05 mA at state 0 |
| [Ures] residual voltage | 0.15 V at state 1 |
| Response time on output | 1.2...1.5 ms on appearance 1.2...1.5 ms on disappearance |
| Load impedance ohmic | 15000 Ohm |
| Output overload protection | By current limiter and electronic circuit breaker |
| Output short-circuit protection | By current limiter and electronic circuit breaker |
| Published component type | PTO module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogusinformatie kan fouten bevatten of verouderd zijn. Volledige specificaties en gecontroleerde gegevens zijn op aanvraag beschikbaar. Bevestig vóór bestelling het onderdeelnummer en de geschiktheid voor uw machine met ons.
Productvragen
Onderzoeksinformatie over dit onderdeel is nog niet beschikbaar in het Nederlands. Vraag ons team om hulp.
Offerte voor dit onderdeel aanvragen