Catalogusreferentie. Beschikbaarheid, exacte specificaties en originele of alternatieve levering worden in de offerte bevestigd.
LXM15MD40N4 — Motion servo drive
Elektrotechniek en besturingOnderdeelnummer: LXM15MD40N4
LXM15MD40N4 — Motion servo drive — Schneider Electric reference LXM15MD40N4. Request a quotation including shipping to your destination. Send equipment details and certificate requirements so we can confirm the exact specification, fitment, availability and warranty terms before ordering.
Op zoek naar Schneider Electric LXM15MD40N4? Deze catalogusreferentie is ingedeeld als ‘Elektrotechniek en besturing’. Stuur het onderdeelnummer en de gegevens van uw machine, zodat we de specificaties en beschikbaarheid kunnen controleren en een offerte inclusief verzending kunnen opstellen.
Beschikbaarheid op aanvraag
Technische specificaties
| Fabrikant | Schneider Electric |
|---|---|
| Onderdeelnummer | LXM15MD40N4 |
| Categorie | Elektrotechniek en besturing |
| Range of product | Lexium 15 |
| Product or component type | Motion servo drive |
| power supply voltage | 208...480 V - 10...10 % |
| Continuous output current | 14 A three phase |
| transient RMS output current | 28 A for 5 s three phase |
| Peak output current | 40 A three phase |
| Nominal power | 7.9 kW three phase |
| Line current | 15.4 A at 208 V three phase 17.7 A at 480 V three phase |
| Apparent power | 10 kVA |
| power supply voltage limits | 187.2…528 V |
| power supply frequency | 50/60 Hz - 5...5 % |
| power supply frequency limits | 47.5…63 Hz |
| Switching frequency | 8 kHz |
| Output voltage | <= power supply voltage |
| Electrical connection | Terminal, clamping capacity: 2.5 mm², AWG 14 (+ 24 VDC, 0 VDC) Terminal, clamping capacity: 4 mm², AWG 12 (PA/+, PC/-, PBi, PBe) Terminal, clamping capacity: 4 mm², AWG 12 (R/L1, S/L2, T/L3) Terminal, clamping capacity: 2.5 mm², AWG 14 (R1A,R1C,LI1,LI2,LI3,LI4,ENABLE,LO1,LO2,PWRI+/PWRI-,AI1+/AI1-,AI2+/AI2-,AO1,AO2) |
| Tightening torque | + 24 VDC, 0 VDC: 0.5…0.6 N.m PA/+, PC/-, PBi, PBe: 0.5…0.6 N.m R/L1, S/L2, T/L3: 0.5…0.6 N.m R1A, R1C, LI1, LI2, LI3, LI4, ENABLE, LO1, LO2, PWR, AI1+/AI1-, AI2+/AI2-: 0.5…0.6 N.m |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal |
| Discrete input number | 2 safety discrete input(s) 5 logic including ENABLE discrete input(s) |
| Discrete input type | Logic (LI1, LI2, LI3, LI4, ENABLE terminals) Safety (PWRI+, PWRI- terminals) |
| input sampling time | AI1+/AI1-, AI2+/AI2: 0.0625 ms analog LI1, LI2, LI3, LI4: 0.25 ms discrete |
| Discrete input voltage | 20...30 V DC for logic 24 V DC for safety |
| Discrete input logic | Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for logic Positive logic (sink) state 0 if < 7 V or input not wired state 1 if > 12 V for safety PWR function active at state 0 |
| Safety input response time | <= 1.5 ms |
| Discrete output number | 1 for relay 2 for logic |
| Discrete output type | Logic LO1, LO2 Relay R1A, R1C NO |
| Discrete output voltage | 24 V DC <= 30 V |
| Discrete output logic | Negative logic (sink) |
| Analogue input number | 2 |
| Published component type | Motion servo drive |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
Catalogusinformatie kan fouten bevatten of verouderd zijn. Volledige specificaties en gecontroleerde gegevens zijn op aanvraag beschikbaar. Bevestig vóór bestelling het onderdeelnummer en de geschiktheid voor uw machine met ons.
Productvragen
Onderzoeksinformatie over dit onderdeel is nog niet beschikbaar in het Nederlands. Vraag ons team om hulp.
Offerte voor dit onderdeel aanvragen