Rysunek techniczny — ABB 1SAE231111R0630 — 1SAE231111R0630 — Installation Contactor

Rysunek techniczny. Representative component image; exact configuration and appearance may vary. Zdjęcia mają charakter poglądowy. Wygląd dostarczonej części może się różnić.

ABB

1SAE231111R0630 — Installation Contactor

stycznik

Numer części: 1SAE231111R0630

ABB 1SAE231111R0630 is the ESB25-30N-06 three-pole installation contactor, with three normally open main contacts and a 230–240 V control circuit. It is rated 25 A in AC-1 and 9 A in AC-3 under the specified operating conditions. Dimensions are 36 × 85 × 65 mm (W × H × D). Confirm the control supply and load requirements before selection.

Szukasz części ABB 1SAE231111R0630? Ta pozycja katalogowa jest sklasyfikowana jako „stycznik”. Prześlij numer części i dane maszyny, abyśmy mogli sprawdzić parametry i dostępność oraz przygotować ofertę z dostawą w cenie.

Dostępność na zapytanie

Cena na zapytanie

Wysyłka w cenieGwarancja i serwisUzyskaj wycenę tej części

Specyfikacja techniczna

ProducentABB
Numer części1SAE231111R0630
KategoriaElektryka i sterowanie
Product Net Width36 mm
Product Net Depth / Length65 mm
Product Net Height85 mm
Product Net Weight0.23 kg
Number of Main Contacts NO3
Number of Main Contacts NC0
Number of Auxiliary Contacts NO0
Number of Auxiliary Contacts NC0
Number of Poles3P
Rated Operational VoltageMain circuit: 400 V AC; 220 V DC
Rated Frequency (f)Control circuit: 50 Hz, 60 Hz, 400 Hz and DC; main circuit: 50 Hz, 60 Hz and DC
Rated Operational Current AC-1 (I e )(NO) 25 A
Rated Operational Current AC-3 (I e )9 A at 230 V single-phase or 400 V three-phase, normally open
Rated Operational Current AC-7a (I e )(NO) 25 A
Rated Operational Current AC-7b (I e )9 A at 230 V single-phase or 400 V three-phase, normally open
Rated Operational Power AC-1 (P e )5.8 kW at 230 V single-phase; 17.3 kW at 400 V three-phase, normally open
Rated Operational Power AC-3 (P e )1.3 kW at 230 V single-phase; 4 kW at 400 V three-phase, normally open
Rated Operational Power AC-7a (P e )5.8 kW at 230 V single-phase; 17.3 kW at 400 V three-phase, normally open
Rated Operational Power AC-7b (P e )1.3 kW at 230 V single-phase; 4 kW at 400 V three-phase, normally open
Rated Breaking Capacity AC-38 x Ie / AC-3
Rated Making Capacity AC-310 x Ie / AC-3
Rated Short-time Withstand Current Low Voltage (I cw )at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 72 A
Rated Insulation Voltage (U i )500 V
Rated Impulse Withstand Voltage (U imp )6 kV
Maximum Electrical Switching Frequency(AC-1) 300 cycles per hour
Coil Operating Limits(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)
Rated Control Circuit Voltage (U c )230 ... 240 V
Power Lossat Rated Operating Conditions AC-1 per Pole 2 W
Published component typeInstallation Contactor
Reference statusPublished part reference; specification and fitment require confirmation
AvailabilityOn request
Degree of protectionIP20
Ambient air temperatureOperation: -25 to +55 °C; storage: -40 to +80 °C

Informacje katalogowe mogą zawierać błędy lub być nieaktualne. Pełne specyfikacje i zweryfikowane dane są dostępne na życzenie. Przed zamówieniem potwierdź z nami numer części i jej dopasowanie do maszyny.

Pytania o produkt

Wyniki badań dotyczących tej części nie są jeszcze dostępne po polsku. Skontaktuj się z naszym zespołem.

Uzyskaj wycenę tej części

Poczuj się jak u siebie.

Wybierz język i miejsce dostawy. Ostateczna cena i warunki wysyłki zostaną potwierdzone w wycenie.